[Steelcube12]

i wanted to get a rear cockin bolt for my spyder, i cant find a good one, also i wanted a good LPC for N2, is the Shocktech a good one?, and does a t-board just make ur BPS go up?

and what all would i need to just make it work ALOT better for woodsball? and with a N2 tank?

This post has been edited by Steelcube12: 28 June 2005 - 06:52 PM

[mikey2856]

you will most likely want a regulator, i suggest a cp reg, torpedo reg, maybe an evil detonator, or a sidewinder.

and t board is like adding nitrous to a ricer, it will go fast but it will max that thing out. if you get n2 and a t board, you'll want a reg, not just whatever came w/ ur gun.

[Steelcube12]

you will most likely want a regulator, i suggest a cp reg, torpedo reg, maybe an evil detonator, or a sidewinder.

and t board is like adding nitrous to a ricer, it will go fast but it will max that thing out. if you get n2 and a t board, you'll want a reg, not just whatever came w/ ur gun.

<{POST_SNAPBACK}>

ok thanks, and i HATE my trigger, its stock and its got a 50g t-switch, how can i make it easier to pull?

and for the reg, is it one size fits all?

[MattMan657]

u can adjust ur pull to the bare minimum. id do it for u for a price but im goin away tomorrow for camp. but a spyder with a tboard and a goof pull is actually not that bad. a spyder with a full lp t-board conversion is quite cool.

[Steelcube12]

is the reg a one size fits all tho, and where can i find a cheap, good reg and t-board? im lookin, but i cant find anythin, what should i type in on froogle? CP reg, er CP vert reg? im really confused

and whats a good rear cockin bolt?

[mikey2856]

cp regs on ebay

acs bolt on ebay

these are both unused items and be sure if you get the acs bolt or any other derlin bolt, do not add oil to it! it will absorb any lube and expand

[Steelcube12]

lil ahead of u on ACS Bolt, it got mosture er somethin so it expanded, had to send it to the shop they'll get another one for me this week

and for a trigger should i get this, ive been lookin at it for awhile http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...ssPageName=WDVW

and for reg, this good? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...7165887125&rd=1

[mikey2856]

before you get the rocker, i suggest you go to a store and feel it out b/c some ppl just hate the way it feels to walk. and thats a good choice on the reg

[Steelcube12]

if i got the rocker would it be adaptable with a t-board and work better?

[mikey2856]

yes it will work with a t board. i think you shoulda just stuck w/ the normal trigger because the rocker is pointless now that you got the t board. because when you're walking on the rocker, it only fires each time your finger hits the microswitch and it does the same thing for a normal trigger.

[Steelcube12]

i just wanted the rocker b/c i have a whole lotta trouble walkin with the normal trigger

and if i get that what hopper should i get, i got an EGGII right now, and i no ill need a better one

[mikey2856]

then i dont suggest the z board, i suggest you go straight to a halo b
you can find them used for about $90 on ebay and theres a gigantic diff in speed w/ the egg and halo. and since the halo feeds harder than the egg, the balls in the feedneck wont be forced up by the air from each shot.

[Steelcube12]

ya, i read an article about the halo b, so ill get that

[Steelcube12]

oh and i have an ACS Bolt right now, ive had alot of problems with it, and i read alot of reviews sayin its bad, i was thinkin bout gettin a diff bolt, a read cockin one, any recommendations? plz post

and what all do i need to make it rear cockin? to make it adaptable to the rear cockin bolt, can my pilot even be rear cockin?

[mikey2856]

http://banditbolts.com/_wsn/page2.html

these are ok

theres a long rear cocking, a short rear cocking, a top cocking, a side cocking, and several other bolts